EnTech Taiwan EnTech Taiwan
August 18, 2017, 07:40:41 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
  Home Help Search Login Register  
  Show Posts
Pages: [1] 2 3 ... 592
1   / DDM FAQ / DDM hotkey manager on: June 28, 2016, 08:13:46 AM
This is not officially supported, but there's a DDM Hotkey Manager available for download here that allows you to define native system-wide hotkeys for use by DDM, eliminating the overhead involved in using Windows shortcut hotkeys. This is a small standalone utility that enables and configures otherwise undocumented features of DDM which some may find useful. See the read me/release notes included with DDM for examples of the command-line parameters you can feed the program.
2   / DDM FAQ / Last DDM release on: June 18, 2016, 04:05:22 PM
The latest release of DDM can be found here. It is backwardly compatible with all monitors that originally shipped with DDM.
3   / Announcements / Forum closure on: January 15, 2014, 07:20:55 PM
At this time, EnTech no longer actively develops software for, or markets software to, end-users. The technical support forum is closed to new users, and remains open for archival purposes only.
4   / PowerStrip for Windows / Re: Windows 8 on: August 17, 2013, 08:26:29 AM
PowerStrip has not and will not be updated to support Win8, but it does work under the 64-bit edition of Win8.
5   / PowerStrip for Windows / Re: Radeon HD 3850 AGP / Windows 7 to Sharp Aquos (1366x768) on: July 21, 2013, 03:36:02 PM
1. If I'm not mistaken the CRU employs an EDID override - its a monitor rather than a GPU utility. The EnTech equivalent would be MonInfo, not PowerStrip.

2. There is no conflict, since one just tells Windows your monitor timing differs from what Sharp says it is, and PowerStrip attempts to directly program the GPU.

3. It depends on whether the EDID override applied by CRU or MonInfo is sufficient or not.
6   / Graphics cards / Re: GeForce GT 610 on: June 29, 2013, 05:33:24 AM
I'm afraid it is not supported. The GeForce 6 used an NV40 class GPU; your GT 610 uses a GF119 class GPU.

(Yes, the naming of these things is confusing...)
7   / PowerStrip for Windows / Re: Monitor not displaying any image on: June 19, 2013, 04:54:39 AM
And just to be clear: *without* PowerStrip, when you boot up with the FireGL you get no picture at all? At any resolution and orientation?
8   / PowerStrip for Windows / Re: Monitor not displaying any image on: June 19, 2013, 04:52:12 AM
It seems like eveything you're doing is right.

Try connecting the monitor to the original graphics card and see if PowerStrip supports it - if so, grab the timing via Advanced Timing Options rather than the EDID and post it here.
9   / PowerStrip for Windows / Re: Monitor not displaying any image on: June 10, 2013, 02:38:59 AM
Are you able to run the monitor in landscape mode? (Check it even if the LCD is physically in portrait mode.)
10   / softMCCS, mControl and Monitor Asset Manager (MonInfo) / Re: SoftMCCS expired on: April 24, 2013, 02:38:44 PM
softMCCS will probably be updated by the end of the month.
11   / PowerStrip for Windows / Re: Locking refresh rate on an LCD TV on: October 06, 2012, 01:44:06 AM
No mobile platforms are explicitly supported, but you should find that that works.
12   / PowerStrip for Windows / Re: Locking refresh rate on an LCD TV on: September 22, 2012, 05:50:40 PM
I'm afraid not. Your GPU isn't supported, and its just coincidental that it works when connected via DVI (maybe resolution dependent?).



13   / PowerStrip for Windows / Re: AMD A8-3870K and PowerStrip on: September 06, 2012, 01:43:50 PM
No. Well: some features are, but many are not.
14   / PowerStrip for Windows / Re: Integrated Intel HD Graphics 3000 on: August 24, 2012, 04:45:49 AM
Any new laptop is going to feature a new graphics controller, whether discrete or integrated. I'm afraid PowerStrip is no longer updated with support for new controllers, so you should assume it won't work and look for a graphics controller that has its own timing options.
15   / PowerStrip for Windows / Re: Driver Verifier causes BSOD from PSTRIP64.SYS on: August 11, 2012, 05:02:32 AM
I think there is a misunderstanding - my fault for not reading more carefully. I thought you were asking if there was a base incompatibility betwen PS and Win7-x64 and the HD5xxx - there is not.

But if you are asking if PS is compatible with MS Verifier, then No it is - even under 32 bit versions of Windows. Some things PS does with the hardware are against the rules, and everything it does has the potential for collision with the hardware's owner (the display driver).
Pages: [1] 2 3 ... 592
Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2006-2008, Simple Machines Valid XHTML 1.0! Valid CSS!