EnTech Taiwan EnTech Taiwan
January 23, 2018, 06:51:27 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
  Home Help Search Login Register  
  Show Posts
Pages: [1] 2 3 ... 121
1   / PowerStrip for Windows / Re: PowerStrip tweak to output 1080p/120Hz in 2D to almost *any* 3D display. on: June 10, 2012, 04:20:38 AM
Hey Mark - Good to see one of the HTPC pioneers drop by. As you may recall, one of the original purposes of PowerStrip in the 1990s was to drive medical CRTs to 240Hz, so the ability to do what you suggest has always been there. But times change and PowerStrip is no longer actively developed to support the latest GPUs, so this kind of thing would have to be accomplished nowadays via the AMD/Intel/Nvidia control panel and display driver. Cheers!
2   / PowerStrip for Windows / Re: NV GT430 Pixel clock problem - Build 3.90.0710 on: April 22, 2011, 07:40:21 AM
It is pretty accurate, but the reported number can vary a bit if there are a lot of other CPU-intensive tasks running.

But re-download or do a Live Update to Build 711, and you should no longer see the 400MHz.
3   / PowerStrip for Windows / Re: NV GT430 Pixel clock problem - Build 3.90.0710 on: April 22, 2011, 02:58:23 AM
It would have been based on calculation, not an accurate reading switch to a few other resolutions and you will see 148MHz at 1080p/60Hz again. There are no changes to NVidia GPU support in the latest build.
4   / PowerStrip for Windows / Re: NV GT430 Pixel clock problem - Build 3.90.0710 on: April 21, 2011, 04:17:36 AM
I'm afraid that's not a bug - PowerStrip simply doesn't support your GPU, which is why it isn't listed in the release notes. The latest build does not add support for the GT430. At some point in your use, you'll see a message saying the pixel clock cannot be detected, and thereafter it will be calculated instead of read from the hardware.
5   / PowerStrip for Windows / Re: Will this software add a resolution to my netbook? on: April 19, 2011, 02:13:11 PM
If it is ION or AMD based, probably. If it is Intel based, probably not.
6   / PowerStrip for Windows / Re: 256 color mode with ATi Radeon X5450 on: April 19, 2011, 11:40:29 AM
Do this here: Windows Display properties > Settings, select the secondary monitor and then go to Advanced > Adapter > List all modes, select 800 by 600 256 colors 60Hz and click Ok, then Apply.
7   / PowerStrip for Windows / Re: Force 1680x1050 on Windows XP on: April 18, 2011, 09:31:28 AM
First of all, why are using a splitter and what is the other device connected? Splitters don't usually have seperate EDIDs - the better ones pass thru the EDID of the primary display, and the cheap ones don't return an EDID to the PC at all.

With the splitter connected, run MonInfo and post the report (Ctrl+S). Then switch the two monitors around on the splitter, run MonInfo again and post a second report.
8   / Monitors, HDTVs, etc. / Re: PROBLEM LG-M1994D-PZ on: April 14, 2011, 04:23:26 AM
I'm afraid the monitor is defective - while it may work via analog VGA, it is missing the EDID - appartently on *all 3 inputs*.

I can't tell you how it got that way, but if you just bought it or its under warranty, you should return it or RMA it.
9   / Monitors, HDTVs, etc. / Re: PROBLEM LG-M1994D-PZ on: April 14, 2011, 03:13:26 AM
You would need to post the diagnostic report (Ctrl+S) from softMCCS before I could comment.

Generate 3 seperate reports:

1. connected to the LG via VGA
2. connected to the LG via DVI-D
3. connected to the LG via HDMI

10   / softMCCS, mControl and Monitor Asset Manager (MonInfo) / Re: edited EDID does not work properly for HDMI on: April 13, 2011, 05:25:23 AM
80Hz is not a VESA standard, so you would need to use a DTD (detailed timing descriptor). The two predefined by Philips are 1920x1080x60Hz and 1360x768x60Hz. You need to change one or both of those to an 80Hz timing you feel your display can handle using the EDID editor of your choice.
11   / softMCCS, mControl and Monitor Asset Manager (MonInfo) / Re: edited EDID does not work properly for HDMI on: April 12, 2011, 02:49:39 PM
Your display has a conservatively rated peak video bandwidth of 140MHz - typical for LCD-TVs - not the 165MHz maximum for single digital DVI, and certainly not beyond that. It can probably handle up to 150MHz safely.

By Philips' spec it should never be driven above 85Hz, 80kHz or 148.50Mhz. That means at 1920x1080 a max of 60Hz, because at 60Hz you are already pushing over 148MHz. At 1680x1050, you can probably run 75Hz but not beyond because that would exceed the 80kHz maximum. At 1360x768 you can probably run 85Hz, but really this is a digital fixed frequency LCD and it is going refresh internally at 60Hz no matter what your graphics card outputs.

So instead of trying to push this LCD-TV above spec, or like it was a multisync CRT, you should think instead of what it is you are attempting to achieve here and why?
12   / softMCCS, mControl and Monitor Asset Manager (MonInfo) / Re: edited EDID does not work properly for HDMI on: April 12, 2011, 05:30:01 AM
It is impossible to answer a question like this without knowing a lot more about your hardware, starting with the original EDID vs. the actual capabilities of the display device.
13   / PowerStrip for Windows / Re: no right click menu, double click opens Win Dialog and unin/reinst wont fix on: April 09, 2011, 02:01:00 AM
Quote
I got the popup message saying that a display card had been detected and only to click ok if the card was presently in its default state.  It wasn't do I clicked cancel.

Correction! this means PowerStrip won't record any of your initial settings, and will attempt to close - what you may be seeing is a failed attempt to close.

14   / PowerStrip for Windows / Re: no right click menu, double click opens Win Dialog and unin/reinst wont fix on: April 09, 2011, 12:01:47 AM
Quote
Is this because the 450 is a new card?

I'm afraid so...

15   / PowerStrip for Windows / Re: unable to run iiyama VMP451 (A902MT) on 1920x1440 on: April 07, 2011, 10:58:23 AM
Here's an INF with revised EDID data for you.

Code:
; INF file generated by Monitor Asset Manager (2.59.0.947), 4/7/2011
; Copyright (c) EnTech Taiwan, 1995-2011.
; Internet: http://www.entechtaiwan.com

[Version]
Signature="$WINDOWS NT$"
Class=Monitor
ClassGUID={4d36e96e-e325-11ce-bfc1-08002be10318}
Provider=%MFG%
DriverVer=4/7/2011, 1.0.0.0
;CatalogFile=YourSignedCatalogFile.cat

[DestinationDirs]
DefaultDestDir=23

[SourceDisksNames]
1=%DISC%

[SourceDisksFiles]
;YourColorProfileFile.icm

[Manufacturer]
%VENDOR%=EDID_OVERRIDE,NTx86,NTamd64

[EDID_OVERRIDE.NTx86]
%PRODUCTID%=OVERRIDDEN-EDID.Install, MONITOR\IVM1918

[EDID_OVERRIDE.NTamd64]
%PRODUCTID%=OVERRIDDEN-EDID.Install.NTamd64, MONITOR\IVM1918

[OVERRIDDEN-EDID.Install.NTx86]
DelReg=DEL_CURRENT_REG
AddReg=OVERRIDDEN-EDID.AddReg, MODE1, DPMS
CopyFiles=OVERRIDDEN-EDID.CopyFiles

[OVERRIDDEN-EDID.Install.NTamd64]
DelReg=DEL_CURRENT_REG
AddReg=OVERRIDDEN-EDID.AddReg, MODE1, DPMS
CopyFiles=OVERRIDDEN-EDID.CopyFiles

[OVERRIDDEN-EDID.Install.NTx86.HW]
AddReg=OVERRIDDEN-EDID_AddReg

[OVERRIDDEN-EDID.Install.NTamd64.HW]
AddReg=OVERRIDDEN-EDID_AddReg

[OVERRIDDEN-EDID_AddReg]
;Base EDID
HKR,EDID_OVERRIDE,"0",0x01,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x26,0xCD,0x18,0x19,0x87,0x08,0xFC,0x02,0x1D,0x0B,0x01,0x04,0x0E,0x24,0x1D,0x63,0xEA,0xA4,0x91,0x9F,0x55,0x4C,0x54,0x23,0x1A,0x4E,0x4F,0xBF,0xEF,0x80,0xA9,0x4F,0xE1,0x4F,0xD1,0x59,0x81,0x59,0x71,0x59,0x61,0x59,0x45,0x59,0x81,0x4F,0x57,0x85,0x80,0xE0,0x72,0xA0,0x48,0x50,0x98,0xD8,0x13,0x00,0x68,0x22,0x11,0x00,0x00,0x1C,0x00,0x00,0x00,0xFD,0x00,0x30,0xA0,0x1E,0x82,0x23,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x00,0x56,0x69,0x73,0x69,0x6F,0x6E,0x4D,0x61,0x73,0x74,0x65,0x72,0x20,0x00,0x00,0x00,0xFE,0x00,0x50,0x72,0x6F,0x20,0x34,0x35,0x31,0x0A,0x20,0x20,0x20,0x20,0x20,0x00,0x58

[DEL_CURRENT_REG]
HKR,MODES
HKR,EDID_OVERRIDE
HKR,,MaxResolution
HKR,,DPMS
HKR,,ICMProfile

[DPMS]
HKR,,DPMS,,1

[MODE1]
HKR,,MaxResolution,,"1920,1440"

[OVERRIDDEN-EDID.AddReg]
HKR,"MODES\1920,1440",Mode1,,"30.0-130.0,48.0-160.0,+,+"

[OVERRIDDEN-EDID.CopyFiles]
;YourColorProfileFile.icm

[Strings]
MFG="EnTech Taiwan"
DISC="Monitor EDID Override Installation Disk"
PRODUCTID="Iiyama IVM1918 (IVM1918 EDID Override)"
VENDOR="Iiyama"

Pages: [1] 2 3 ... 121
Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2006-2008, Simple Machines Valid XHTML 1.0! Valid CSS!