EnTech Taiwan EnTech Taiwan
June 28, 2017, 04:48:15 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Search Login Register  
Pages: 1 ... 3 4 [5] 6
  Print  
Author Topic: 1366x768 LCD timings  (Read 232563 times)
RSoro01

Posts: 1


« Reply #60 on: January 12, 2007, 05:10:00 AM »

Hi.

I checked in the HDTV timing database forum and didn't see my HDTV: Toshiba 32HLC56 (display resolution stated as 1366x768). I am trying to use this TV as both my computer monitor and TV. As a TV it works fine but, as a computer monitor, it stinks. I'm connecting the computer via the DVI-I output on my card and hooking it up to the TV via the HDMI input. My problem is that, while images such as photos, etc are sharp and clear, text is fuzzy. So menus and the text in apps such as browsers, etc are hard to read.

I have Powerstrip and have tried the various resolutions/timings I've seen here. But everything is made worse rather than better.

I've also hooked up a 2nd computer via the RGB input with the same results as through the HDMI.

Anyone else with this TV have this problem and find a solution?

Rich
Logged
nimrod77

Posts: 1


« Reply #61 on: January 13, 2007, 03:26:29 AM »

Quote from: "Veron"
Can anyone help me...

i bought 37" LCDTV which have 1366x768@66 in E-EDID (powerstrip)


but when i want to set it i get on TV out of range...

If i set 1368x768 i get on TV 1280x768 but in right corner is missing picture.

But i dont get it, when i start PC TV set automaticly on 1366x768 so that res. is possible on this TV

so question is: how to set 1366x768 res in Windows?

edit: i found out


So do you have your HTPC running through your HDMI connection at 1366x768 all the time in everything and it works 100% of the time??
Logged
Veron

Posts: 6


« Reply #62 on: January 15, 2007, 04:08:35 AM »

It is connected true DVI and it's working all the time 100%...

Logged
knowley

Posts: 1


« Reply #63 on: January 26, 2007, 01:08:37 PM »

Hi people

I was wondering if anyone can help me get my computer to output an extended windows desktop from my computer (DVI) to my JVC LCD (HDMI)?

The native resolution quoted for this panel is 1366x768 but not matter what I try in powerstrip gives me a stable picture the TV will accept.  My graphics card is an ATI based X800XL.

I used the program MonInfo (Monitor Asset Manager) to obtain the following infomation, interestingly the drop downs in the program show my VGA screen as 1 & 2, then the TV as number 3 (JVC Monitor on Auxiliary Port):

Quote
Monitor
  Windows description......... JVC Monitor
  Manufacturer description.... LT-32DS6
  Manufacturer................ JVC
  HuhHuhHuhHuhHuhHuhHuhHuhHuh?
  Plug and Play ID............ JVC2096
  Serial number............... n/a
  EDID data source............ I2C bus (real-time)
  HuhHuhHuhHuhHuhHuhHuhHuhHuh?
  Manufacture date............ 2005
  EDID revision............... 1.3
  Display type and signal..... Digital
  Sync input support.......... n/a
  Screen size................. 700 x 390 mm (~33")
  Power management............ Active off/sleep

Color characteristics
  Display gamma............... 2.20
  Red chromaticity............ Rx 0.618 - Ry 0.351
  Green chromaticity.......... Gx 0.280 - Gy 0.605
  Blue chromaticity........... Bx 0.152 - By 0.063
  White point (default)....... Wx 0.313 - Wy 0.329

Timing characteristics
  VESA GTF support............ Not supported
  Horizontal scan range....... 15-46kHz
  Vertical scan range......... 59-61Hz
  Video bandwidth............. 80MHz
  Extension blocks............ 1
  Timing recommendation #1.... 1920x540 at 50Hz
      Modeline................ "1920x540" 74.250 1920 2448 2492 2640 540 574 579 562 +hsync +vsync
  Timing recommendation #2.... 1920x1080 at 25Hz
      Modeline................ "1920x1080" 74.250 1920 2448 2492 2640 1080 1148 1158 1124 interlace +hsync +vsync
  Timing recommendation #3.... 1920x540 at 60Hz
      Modeline................ "1920x540" 74.250 1920 2008 2052 2200 540 542 547 562 +hsync +vsync
  Timing recommendation #4.... 1920x1080 at 30Hz
      Modeline................ "1920x1080" 74.250 1920 2008 2052 2200 1080 1084 1094 1124 interlace +hsync +vsync
  Timing recommendation #5.... 1280x720 at 50Hz
      Modeline................ "1280x720" 74.250 1280 1720 1760 1980 720 741 746 750 +hsync +vsync
  Timing recommendation #6.... 1280x720 at 60Hz
      Modeline................ "1280x720" 74.250 1280 1390 1430 1650 720 725 730 750 +hsync +vsync
  Timing recommendation #7.... 720x576 at 50Hz
      Modeline................ "720x576" 27.000 720 732 796 864 576 581 586 625 -hsync -vsync
  Timing recommendation #8.... 720x576 at 50Hz
      Modeline................ "720x576" 27.000 720 732 796 864 576 581 586 625 -hsync -vsync
  Timing recommendation #9.... 720x480 at 60Hz
      Modeline................ "720x480" 27.000 720 736 798 858 480 489 495 525 -hsync -vsync

Standard timings supported
   720 x  480 at  60Hz - JVC
   720 x  576 at  50Hz - JVC
  1280 x  720 at  50Hz - JVC
  1280 x  720 at  60Hz - JVC
  1920 x  540 at  50Hz - JVC
  1920 x  540 at  60Hz - JVC
  1920 x 1080 at  25Hz - JVC
  1920 x 1080 at  30Hz - JVC

Raw EDID base
  00: 00 FF FF FF FF FF FF 00  2A C3 96 20 01 01 01 01
  10: 00 0F 01 03 80 46 27 78  2A 7C 11 9E 59 47 9B 27
  20: 10 50 54 00 00 00 01 01  01 01 01 01 01 01 01 01
  30: 01 01 01 01 01 01 01 1D  80 D0 72 1C 16 20 10 2C
  40: 25 80 BA 88 21 00 00 9E  01 1D 80 18 71 1C 16 20
  50: 58 2C 25 00 BA 88 21 00  00 9E 00 00 00 FC 00 4C
  60: 54 2D 33 32 44 53 36 0A  20 20 20 20 00 00 00 FD
  70: 00 3B 3D 0F 2E 08 00 0A  20 20 20 20 20 20 01 2B

Raw EDID extension (CEA-861)
  00: 02 03 1F 72 4C 94 05 13  04 12 11 03 01 06 07 15
  10: 16 23 09 07 07 83 01 00  00 65 03 0C 00 10 00 01
  20: 1D 00 BC 52 D0 1E 20 B8  28 55 40 BA 88 21 00 00
  30: 1E 01 1D 00 72 51 D0 1E  20 6E 28 55 00 BA 88 21
  40: 00 00 1E 8C 0A D0 90 20  40 31 20 0C 40 55 00 BA
  50: 88 21 00 00 18 8C 0A D0  90 20 40 31 20 0C 40 55
  60: 00 12 88 21 00 00 18 8C  0A D0 8A 20 E0 2D 10 10
  70: 3E 96 00 BA 88 21 00 00  18 00 00 00 00 00 00 D8

EIA/CEA-861 Information
  Revision number............. 3
  DTV underscan............... Not supported
  Basic audio................. Supported
  YCbCr 4:4:4................. Supported
  YCbCr 4:2:2................. Supported
  Native formats supported.... 2
  DTV formats supported....... 12

CE standard timings supported
  1920 x 1080i at       50Hz (16:9) - HDTV (Native)
  1920 x 1080i at 59.94/60Hz (16:9) - HDTV
  1280 x  720p at       50Hz (16:9) - HDTV
  1280 x  720p at 59.94/60Hz (16:9) - HDTV
   720 x  576p at       50Hz (16:9) - EDTV
   720 x  576p at       50Hz  (4:3) - EDTV
   720 x  480p at 59.94/60Hz (16:9) - EDTV
   640 x  480p at 59.94/60Hz  (4:3) - Default
   720 x  480i at 59.94/60Hz  (4:3) - Doublescan
   720 x  480i at 59.94/60Hz (16:9) - Doublescan
   720 x  576i at       50Hz  (4:3) - Doublescan
   720 x  576i at       50Hz (16:9) - Doublescan

Display adapter
  Adapter description......... Auxiliary port
  Adapter device ID........... 0x556D1002
  Display settings............ n/a


Thanks!!!
Logged
tarcisio

Posts: 1


« Reply #64 on: February 26, 2007, 02:58:57 PM »

I worked very hard this weekend with several sessions of tries,
first by an nv geforce 6150 integrated on my Asus A8NVM-CSM and then with one ATI x1650 pro pcix .

I used the latest version of Powerstrip following the suggest and several combinations found into this forum and elsewhere on the Internet for panels that would have to be equivalents to mine (for ex. Sharp 32ga5).

I use a 5 mt DVI cable (gold series) by Lindy (http://www.lindy.com/it/productfolder/04/41242/index.php) .

Results:
1 - Geforce 6150 + powerstrip (several config.)

The vga effectively sends 1360 or 1368 horizontal pixel, it seems without problems ( no disturbs or distorsion, the font and the rest of desktop are very clear and sharpen ) but the panel always get one res. of 1280x768 although many tries of auto sync and fine sync via sharp menu by remote control.

Therefore I have two black sidebands and moving the mouse over the desktop it slides to right and on the left (virtual desktop style ) in order to visualize the lacking portions of the screen!

2 - ATI x1650 pro

The driver supports natively 1360x768 and 1368x768, but for both the risolutions the panel marks them as 1280x1024 (that standard VESA res. effectively supported according the datasheet into the Sharp handbook).

I have tried many customizations of the parameters by powerstrip, but every time the ATI goes to 1360 or 1368, the pan. sets itself @1280.

I ask to myself if effectively is there any way to set up 136... x768 res. (not VESA standard) by DVI connection .

But why then it works @1280X768?  :?:

Can it be a cable problem?  Sad  :?:

Thanks in advance
Tarcisio
Logged
nitro

Posts: 1


« Reply #65 on: April 04, 2007, 02:13:10 PM »

Hi everyone, well done for a great forum here, it seems very useful!

I have installed an ATI X1600 Pro PCI Express Video card and its attached directly to a Grundig Cinemo tv via its HDMI interface.  No adaptors or anything like that, its direct hdmi all the way.

As you may have guessed, the tv has a resolution of 1366 X 768 and I am trying using the powerstrip program but so far with no success as the image either does not show, or becomes garbled.

Any suggestions?

Thanks!
Logged
Flabado

Posts: 36


« Reply #66 on: May 23, 2007, 08:48:53 AM »

Has anyone ever tried to make or use a breakout box to convert DVI to VGA? It occurred to me that such a box could allow me to run a native 1366x768 mode (if the BOB had a writable EDID) then convert to analog for the VGA connector on my TV. I found a BOB at the link below, but it doesn't mention specific resolutions or writable EDID so I don't know if this will work. Also it's $360, which is a bit steep for such a simple device.

http://sewelldirect.com/gefendvitovgaconversionbox.asp
Logged
rcl

Posts: 2


« Reply #67 on: July 16, 2007, 08:03:46 PM »

hi rick, i am trying to add a new resolution of 1366x768 to my display resolution in preparation for hooking my acer laptop with intel 945GM to my new samsung lcd tv.
however, after restarting the pc, this resolution i just added (1366x768)
still does not appear in the display properties configuration slider.

do i need to actually hook up my laptop to the samsung lcd for
this resolution to appear in the display settings?

pls. help, thanks
Logged
palmiermedicine

Posts: 1


« Reply #68 on: August 04, 2007, 07:09:48 AM »

I have a toshiba 32hlc56 and am using powerstrip, for some reason I cannot load the customized resolution. What am I doing wrong and what would be the proper resolution and settings for this monitor?
Logged
mudu

Posts: 1


« Reply #69 on: March 04, 2008, 07:02:20 AM »

I have a 32" HLT-32V2 LCD TV from Hyundai (Corporation, not Hyundai IQ).

I'm trying hard to get 1366x768. I connect a PC with integrated Ati 1250 graphics. I'm using VGA, since that is the only cable I have and since some have said that connecting through VGA rather than HDMI is preferred for this TV. I don't know if that is the case though.

I've tried some modes in powerstrip (1360, 1366, 1368 ...) but when I activate them the PC and TV jump back to 1360 anyway and re-scales that to cover the entire TV screen.

This is EDID data that someone else posted in another forum. I don't know what to make of it but maybe it can help someone help me here?

-----------------------------------
VGA
Monitor
Windows description......... Plug and Play Monitor
Manufacturer description.... 32"TFT
Manufacturer................ OEM
HuhHuhHuhHuhHuhHuhHuhHuhHuh?
Plug and Play ID............ OEM0000
Serial number............... n/a
EDID data source............ Registry (stored)
HuhHuhHuhHuhHuhHuhHuhHuhHuh?
Manufacture date............ 2006, ISO week 27
EDID revision............... 1.3
Display type and signal..... Analog 0.700,0.300 (1.0V p-p)
Sync input support.......... Separate
Screen size................. 700 x 390 mm (~33")
Power management............ n/a

Color characteristics
Display gamma............... 2,20
Red chromaticity............ Rx 0,652 - Ry 0,332
Green chromaticity.......... Gx 0,270 - Gy 0,589
Blue chromaticity........... Bx 0,141 - By 0,068
White point (default)....... Wx 0,285 - Wy 0,293

Timing characteristics
VESA GTF support............ Not supported
Horizontal scan range....... n/a
Vertical scan range......... n/a
Video bandwidth............. n/a
Extension blocks............ n/a
Timing recommendation #1.... 1360x768 at 60Hz
Modeline................ "1360x768" 85,500 1360 1424 1536 1792 768 771 777 795 +hsync +vsync
Timing recommendation #2.... 1280x1024 at 60Hz
Modeline................ "1280x1024" 108,000 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
Timing recommendation #3.... 1280x768 at 60Hz
Modeline................ "1280x768" 79,500 1280 1344 1472 1664 768 771 778 798 -hsync +vsync

Standard timings supported
640 x 480 at 60Hz - IBM VGA
640 x 480 at 72Hz - VESA
640 x 480 at 75Hz - VESA
800 x 600 at 56Hz - VESA
800 x 600 at 60Hz - VESA
800 x 600 at 72Hz - VESA
800 x 600 at 75Hz - VESA
1024 x 768 at 60Hz - VESA
1024 x 768 at 70Hz - VESA
1024 x 768 at 75Hz - VESA
1280 x 768 at 60Hz - OEM
1280 x 1024 at 60Hz - OEM
1360 x 768 at 60Hz - OEM

Raw EDID base
00: 00 FF FF FF FF FF FF 00 3C AD 00 00 00 00 00 00
10: 1B 10 01 03 08 46 27 78 0A 03 20 A7 55 45 96 24
20: 11 49 4B 2F CE 00 01 01 01 01 01 01 01 01 01 01
30: 01 01 01 01 01 01 66 21 50 B0 51 00 1B 30 40 70
40: 36 00 50 00 53 00 00 1E 30 2A 00 98 51 00 2A 40
50: 30 70 13 00 00 00 54 00 00 1E 0E 1F 00 80 51 00
60: 1E 30 40 80 37 00 00 00 53 00 00 1C 00 00 00 FC
70: 00 33 32 22 54 46 54 0A 0A 0A 0A 0A 0A 0A 00 22

Display adapter
Adapter description......... NVIDIA Quadro NVS 120M
Adapter device ID........... 0x01D810DE
Display settings............ 1280x720, 32bpp


HDMI
Monitor
Windows description......... OEM Monitor
Manufacturer description.... 32'' TFT-TV
Manufacturer................ OEM
HuhHuhHuhHuhHuhHuhHuhHuhHuh?
Plug and Play ID............ OEM0000
Serial number............... n/a
EDID data source............ I2C bus (real-time)
HuhHuhHuhHuhHuhHuhHuhHuhHuh?
Manufacture date............ 2006, ISO week 26
EDID revision............... 1.3
Display type and signal..... Digital
Sync input support.......... n/a
Screen size................. 160 x 90 mm (~8")
Power management............ n/a

Color characteristics
Display gamma............... 2,20
Red chromaticity............ Rx 0,652 - Ry 0,332
Green chromaticity.......... Gx 0,270 - Gy 0,589
Blue chromaticity........... Bx 0,141 - By 0,068
White point (default)....... Wx 0,285 - Wy 0,293

Timing characteristics
VESA GTF support............ Not supported
Horizontal scan range....... 15-46kHz
Vertical scan range......... 49-61Hz
Video bandwidth............. 80MHz
Extension blocks............ 1
Timing recommendation #1.... 1920x540 at 60Hz
Modeline................ "1920x540" 74,250 1920 2008 2052 2200 540 542 547 562 +hsync +vsync
Timing recommendation #2.... 1920x1080 at 30Hz
Modeline................ "1920x1080" 74,250 1920 2008 2052 2200 1080 1084 1094 1124 interlace +hsync +vsync
Timing recommendation #3.... 1280x720 at 60Hz
Modeline................ "1280x720" 74,250 1280 1390 1430 1650 720 725 730 750 +hsync +vsync
Timing recommendation #4.... 720x480 at 60Hz
Modeline................ "720x480" 27,000 720 736 798 858 480 489 495 525 -hsync -vsync
Timing recommendation #5.... 1440x240 at 60Hz
Modeline................ "1440x240" 27,000 1440 1478 1602 1716 240 244 247 262 -hsync -vsync
Timing recommendation #6.... 1440x480 at 30Hz
Modeline................ "1440x480" 27,000 1440 1478 1602 1716 480 488 494 524 interlace -hsync -vsync
Timing recommendation #7.... 1920x540 at 50Hz
Modeline................ "1920x540" 74,250 1920 2448 2492 2640 540 574 579 562 +hsync +vsync
Timing recommendation #8.... 1920x1080 at 25Hz
Modeline................ "1920x1080" 74,250 1920 2448 2492 2640 1080 1148 1158 1124 interlace +hsync +vsync
Timing recommendation #9.... 1280x720 at 50Hz
Modeline................ "1280x720" 74,250 1280 1720 1760 1980 720 741 746 750 +hsync +vsync
Timing recommendation #10... 720x576 at 50Hz
Modeline................ "720x576" 27,000 720 732 796 864 576 581 586 625 -hsync -vsync

Standard timings supported
640 x 480 at 60Hz - IBM VGA
720 x 480 at 60Hz - OEM
720 x 576 at 50Hz - OEM
1280 x 720 at 50Hz - OEM
1280 x 720 at 60Hz - OEM
1440 x 240 at 60Hz - OEM
1440 x 480 at 30Hz - OEM
1920 x 540 at 50Hz - OEM
1920 x 540 at 60Hz - OEM
1920 x 1080 at 25Hz - OEM
1920 x 1080 at 30Hz - OEM

Raw EDID base
00: 00 FF FF FF FF FF FF 00 3C AD 00 00 00 00 00 00
10: 1A 10 01 03 80 10 09 78 0A 03 20 A7 55 45 96 24
20: 11 49 4B 20 00 00 01 01 01 01 01 01 01 01 01 01
30: 01 01 01 01 01 01 01 1D 80 18 71 1C 16 20 58 2C
40: 25 00 10 09 00 00 00 9E 01 1D 00 72 51 D0 1E 20
50: 6E 28 55 00 10 09 00 00 00 1E 00 00 00 FC 00 33
60: 32 27 27 20 54 46 54 2D 54 56 0A 20 00 00 00 FD
70: 00 31 3D 0F 2E 08 00 0A 20 20 20 20 20 20 01 BE

Raw EDID extension (CEA-861)
00: 02 03 1C 71 49 01 02 04 85 06 11 13 14 15 23 09
10: 07 01 83 01 00 00 65 03 0C 00 10 00 8C 0A D0 8A
20: 20 E0 2D 10 10 3E 96 00 04 03 00 00 00 18 8C 0A
30: A0 14 51 F0 16 00 26 7C 43 00 04 03 00 00 00 98
40: 01 1D 80 D0 72 1C 16 20 10 2C 25 80 10 09 00 00
50: 00 9E 01 1D 00 BC 52 D0 1E 20 B8 28 55 40 10 09
60: 00 00 00 1E 8C 0A D0 90 20 40 31 20 0C 40 55 00
70: 04 03 00 00 00 18 00 00 00 00 00 00 00 00 00 9E

EIA/CEA-861 Information
Revision number............. 3
DTV underscan............... Not supported
Basic audio................. Supported
YCbCr 4:4:4................. Supported
YCbCr 4:2:2................. Supported
Native formats supported.... 1
DTV formats supported....... 9

CE standard timings supported
640 x 480p at 59.94/60Hz (4:3) - Default
720 x 480p at 59.94/60Hz (4:3) - EDTV
1280 x 720p at 59.94/60Hz (16:9) - HDTV
1920 x 1080i at 59.94/60Hz (16:9) - HDTV (Native)
720 x 480i at 59.94/60Hz (4:3) - Doublescan
720 x 576p at 50Hz (4:3) - EDTV
1280 x 720p at 50Hz (16:9) - HDTV
1920 x 1080i at 50Hz (16:9) - HDTV
720 x 576i at 50Hz (4:3) - Doublescan

Display adapter
Adapter description......... Auxiliary port
Adapter device ID........... 0x01D810DE
Display settings............ n/a
-----------------------------------

In the manual for the TV it says (my translation):
"The screens maximal resolution is 1366 x 768, vertical sync frequency range is 56-85 Hz, horizontal sync frequency range is  30-69 KHz"

The manual also has a list of "typical modes". Last on that list is:
mode 20: 1366 (Hor), 768 (Ver), 47,7 (Hor. kHz), 60 (Ver. Hz)

I hope someone can help me out!  Smiley I would be extremely grateful.  Tongue
Logged
Ben_Ben

Posts: 1


« Reply #70 on: May 07, 2008, 04:20:50 PM »

Dear all, I bought a 37" Regza TV (native res 1366x768) and I tried for days to get a 1:1 resolution using a DVI to HDMI cable, without success.
I will buy a VGA cable tomorrow to keep on trying.

I'm puzzled by my TV's manual, in the "Connecting a PC" section it says :
---------------------------------------
The following signals can be displayed :
VGA : 640x480/60Hz (VESA)
VGA : 640x480/75Hz (VESA)
SVGA : 800x600/60Hz (VESA)
SVGA : 800x600/75Hz (VESA)
XGA : 1024x768/60Hz (VESA)
XGA : 1024x768/70Hz (VESA)
XGA : 1024x768/75Hz (VESA)

IMPORTANT NOTE : SXGA will display but it
will not be to VESA standards.

When connecting a PC using HDMI the
following signals can be accepted :
1080i 50/60Hz - 720p 50/60Hz.
----------------------------------------

Here is Moninfo :
Code:
Monitor
  Windows description......... Toshiba Monitor
  Manufacturer description.... TOSHIBA-TV
  Manufacturer................ Toshiba
  ????????????????????????????
  Plug and Play ID............ TSB0105
  Serial number............... n/a
  EDID data source............ I2C bus (real-time)
  ????????????????????????????
  Manufacture date............ 2007
  EDID revision............... 1.3
  Display type and signal..... Digital
  Sync input support.......... n/a
  Screen size................. 1050 x 590 mm (~50")
  Power management............ n/a

Color characteristics
  Display gamma............... 2,20
  Red chromaticity............ Rx 0,625 - Ry 0,340
  Green chromaticity.......... Gx 0,280 - Gy 0,595
  Blue chromaticity........... Bx 0,155 - By 0,070
  White point (default)....... Wx 0,283 - Wy 0,298

Timing characteristics
  VESA GTF support............ Not supported
  Horizontal scan range....... 15-46kHz
  Vertical scan range......... 49-61Hz
  Video bandwidth............. 80MHz
  Extension blocks............ 1
  Timing recommendation #1.... 1920x540 at 50Hz
      Modeline................ "1920x540" 74,250 1920 2448 2492 2640 540 574 579 562 +hsync +vsync
  Timing recommendation #2.... 1920x1080 at 25Hz
      Modeline................ "1920x1080" 74,250 1920 2448 2492 2640 1080 1148 1158 1124 interlace +hsync +vsync
  Timing recommendation #3.... 720x576 at 50Hz
      Modeline................ "720x576" 27,000 720 732 796 864 576 581 586 625 -hsync -vsync
  Timing recommendation #4.... 1280x720 at 50Hz
      Modeline................ "1280x720" 74,250 1280 1720 1760 1980 720 741 746 750 +hsync +vsync
  Timing recommendation #5.... 720x576 at 50Hz
      Modeline................ "720x576" 27,000 720 732 796 864 576 581 586 625 -hsync -vsync
  Timing recommendation #6.... 1920x540 at 60Hz
      Modeline................ "1920x540" 74,250 1920 2008 2052 2200 540 542 547 562 +hsync +vsync
  Timing recommendation #7.... 1920x1080 at 30Hz
      Modeline................ "1920x1080" 74,250 1920 2008 2052 2200 1080 1084 1094 1124 interlace +hsync +vsync
  Timing recommendation #8.... 720x480 at 60Hz
      Modeline................ "720x480" 27,000 720 736 798 858 480 489 495 525 -hsync -vsync
  Timing recommendation #9.... 720x480 at 60Hz
      Modeline................ "720x480" 27,000 720 736 798 858 480 489 495 525 -hsync -vsync

Standard timings supported
   640 x  480 at  60Hz - IBM VGA
   720 x  480 at  60Hz - Toshiba
   720 x  576 at  50Hz - Toshiba
  1280 x  720 at  50Hz - Toshiba
  1920 x  540 at  50Hz - Toshiba
  1920 x  540 at  60Hz - Toshiba
  1920 x 1080 at  25Hz - Toshiba
  1920 x 1080 at  30Hz - Toshiba

Raw EDID base
  00: 00 FF FF FF FF FF FF 00  52 62 05 01 00 00 00 00
  10: 00 11 01 03 80 69 3B 78  0A 0D C9 A0 57 47 98 27
  20: 12 48 4C 20 00 00 01 01  01 01 01 01 01 01 01 01
  30: 01 01 01 01 01 01 01 1D  80 D0 72 1C 16 20 10 2C
  40: 25 80 C4 8E 21 00 00 9E  8C 0A D0 90 20 40 31 20
  50: 0C 40 55 00 C4 8E 21 00  00 18 00 00 00 FC 00 54
  60: 4F 53 48 49 42 41 2D 54  56 0A 20 20 00 00 00 FD
  70: 00 31 3D 0F 2E 08 00 0A  20 20 20 20 20 20 01 4F

Raw EDID extension (CEA-861)
  00: 02 03 23 77 4D 94 13 12  16 11 15 05 04 03 07 02
  10: 06 01 23 09 07 07 6C 03  0C 00 10 00 00 10 C0 15
  20: 15 1F 1F 01 1D 00 BC 52  D0 1E 20 B8 28 55 40 C4
  30: 8E 21 00 00 1E 8C 0A D0  90 20 40 31 20 0C 40 55
  40: 00 13 8E 21 00 00 18 01  1D 80 18 71 1C 16 20 58
  50: 2C 25 00 C4 8E 21 00 00  9E 8C 0A D0 8A 20 E0 2D
  60: 10 10 3E 96 00 C4 8E 21  00 00 18 8C 0A D0 8A 20
  70: E0 2D 10 10 3E 96 00 13  8E 21 00 00 18 00 00 EA

EIA/CEA-861 Information
  Revision number............. 3
  DTV underscan............... Not supported
  Basic audio................. Supported
  YCbCr 4:4:4................. Supported
  YCbCr 4:2:2................. Supported
  Native formats supported.... 7
  DTV formats supported....... 13

CE standard timings supported
  1920 x 1080i at       50Hz (16:9) - HDTV (Native)
  1280 x  720p at       50Hz (16:9) - HDTV
   720 x  576p at       50Hz (16:9) - EDTV
   720 x  576i at       50Hz (16:9) - Doublescan
   720 x  576p at       50Hz  (4:3) - EDTV
   720 x  576i at       50Hz  (4:3) - Doublescan
  1920 x 1080i at 59.94/60Hz (16:9) - HDTV
  1280 x  720p at 59.94/60Hz (16:9) - HDTV
   720 x  480p at 59.94/60Hz (16:9) - EDTV
   720 x  480i at 59.94/60Hz (16:9) - Doublescan
   720 x  480p at 59.94/60Hz  (4:3) - EDTV
   720 x  480i at 59.94/60Hz  (4:3) - Doublescan
   640 x  480p at 59.94/60Hz  (4:3) - Default

Display adapter
  Adapter description......... Auxiliary port
  Adapter device ID........... 0x31501002
  Display settings............ n/a

User/computer information
  Registered user name........
  Registered organization..... n/a
  Network user name...........
  Network computer name....... VGN-A317M
  Windows version ............ Windows XP
  Windows build .............. 5.01.2600 Service Pack 2
  Installation date .......... 18/06/2006 12:00:00


The manual also states some HDMI acceptable H/Vfreq along with pixel freq but for reloutions that I don't care about. Is this data usable ?

So far I only got "overscanned" 1280x720 using various settings from this forum. I'd like to get a 1:1 either 1360 or 1368. Can anyone help me ?
Logged
Ben_Ben

Posts: 1


« Reply #71 on: May 07, 2008, 04:22:35 PM »

Dear all, I bought a 37" Regza TV (native res 1366x768) and I tried for days to get a 1:1 resolution using a DVI to HDMI cable, without success.
I will buy a VGA cable tomorrow to keep on trying.

I'm puzzled by my TV's manual, in the "Connecting a PC" section it says :
---------------------------------------
The following signals can be displayed :
VGA : 640x480/60Hz (VESA)
VGA : 640x480/75Hz (VESA)
SVGA : 800x600/60Hz (VESA)
SVGA : 800x600/75Hz (VESA)
XGA : 1024x768/60Hz (VESA)
XGA : 1024x768/70Hz (VESA)
XGA : 1024x768/75Hz (VESA)

IMPORTANT NOTE : SXGA will display but it
will not be to VESA standards.

When connecting a PC using HDMI the
following signals can be accepted :
1080i 50/60Hz - 720p 50/60Hz.
----------------------------------------

Here is Moninfo :
Quote
Monitor
  Windows description......... Toshiba Monitor
  Manufacturer description.... TOSHIBA-TV
  Manufacturer................ Toshiba
  HuhHuhHuhHuhHuhHuhHuhHuhHuh?
  Plug and Play ID............ TSB0105
  Serial number............... n/a
  EDID data source............ I2C bus (real-time)
  HuhHuhHuhHuhHuhHuhHuhHuhHuh?
  Manufacture date............ 2007
  EDID revision............... 1.3
  Display type and signal..... Digital
  Sync input support.......... n/a
  Screen size................. 1050 x 590 mm (~50")
  Power management............ n/a

Color characteristics
  Display gamma............... 2,20
  Red chromaticity............ Rx 0,625 - Ry 0,340
  Green chromaticity.......... Gx 0,280 - Gy 0,595
  Blue chromaticity........... Bx 0,155 - By 0,070
  White point (default)....... Wx 0,283 - Wy 0,298

Timing characteristics
  VESA GTF support............ Not supported
  Horizontal scan range....... 15-46kHz
  Vertical scan range......... 49-61Hz
  Video bandwidth............. 80MHz
  Extension blocks............ 1
  Timing recommendation #1.... 1920x540 at 50Hz
      Modeline................ "1920x540" 74,250 1920 2448 2492 2640 540 574 579 562 +hsync +vsync
  Timing recommendation #2.... 1920x1080 at 25Hz
      Modeline................ "1920x1080" 74,250 1920 2448 2492 2640 1080 1148 1158 1124 interlace +hsync +vsync
  Timing recommendation #3.... 720x576 at 50Hz
      Modeline................ "720x576" 27,000 720 732 796 864 576 581 586 625 -hsync -vsync
  Timing recommendation #4.... 1280x720 at 50Hz
      Modeline................ "1280x720" 74,250 1280 1720 1760 1980 720 741 746 750 +hsync +vsync
  Timing recommendation #5.... 720x576 at 50Hz
      Modeline................ "720x576" 27,000 720 732 796 864 576 581 586 625 -hsync -vsync
  Timing recommendation #6.... 1920x540 at 60Hz
      Modeline................ "1920x540" 74,250 1920 2008 2052 2200 540 542 547 562 +hsync +vsync
  Timing recommendation #7.... 1920x1080 at 30Hz
      Modeline................ "1920x1080" 74,250 1920 2008 2052 2200 1080 1084 1094 1124 interlace +hsync +vsync
  Timing recommendation #8.... 720x480 at 60Hz
      Modeline................ "720x480" 27,000 720 736 798 858 480 489 495 525 -hsync -vsync
  Timing recommendation #9.... 720x480 at 60Hz
      Modeline................ "720x480" 27,000 720 736 798 858 480 489 495 525 -hsync -vsync

Standard timings supported
   640 x  480 at  60Hz - IBM VGA
   720 x  480 at  60Hz - Toshiba
   720 x  576 at  50Hz - Toshiba
  1280 x  720 at  50Hz - Toshiba
  1920 x  540 at  50Hz - Toshiba
  1920 x  540 at  60Hz - Toshiba
  1920 x 1080 at  25Hz - Toshiba
  1920 x 1080 at  30Hz - Toshiba

Raw EDID base
  00: 00 FF FF FF FF FF FF 00  52 62 05 01 00 00 00 00
  10: 00 11 01 03 80 69 3B 78  0A 0D C9 A0 57 47 98 27
  20: 12 48 4C 20 00 00 01 01  01 01 01 01 01 01 01 01
  30: 01 01 01 01 01 01 01 1D  80 D0 72 1C 16 20 10 2C
  40: 25 80 C4 8E 21 00 00 9E  8C 0A D0 90 20 40 31 20
  50: 0C 40 55 00 C4 8E 21 00  00 18 00 00 00 FC 00 54
  60: 4F 53 48 49 42 41 2D 54  56 0A 20 20 00 00 00 FD
  70: 00 31 3D 0F 2E 08 00 0A  20 20 20 20 20 20 01 4F

Raw EDID extension (CEA-861)
  00: 02 03 23 77 4D 94 13 12  16 11 15 05 04 03 07 02
  10: 06 01 23 09 07 07 6C 03  0C 00 10 00 00 10 C0 15
  20: 15 1F 1F 01 1D 00 BC 52  D0 1E 20 B8 28 55 40 C4
  30: 8E 21 00 00 1E 8C 0A D0  90 20 40 31 20 0C 40 55
  40: 00 13 8E 21 00 00 18 01  1D 80 18 71 1C 16 20 58
  50: 2C 25 00 C4 8E 21 00 00  9E 8C 0A D0 8A 20 E0 2D
  60: 10 10 3E 96 00 C4 8E 21  00 00 18 8C 0A D0 8A 20
  70: E0 2D 10 10 3E 96 00 13  8E 21 00 00 18 00 00 EA

EIA/CEA-861 Information
  Revision number............. 3
  DTV underscan............... Not supported
  Basic audio................. Supported
  YCbCr 4:4:4................. Supported
  YCbCr 4:2:2................. Supported
  Native formats supported.... 7
  DTV formats supported....... 13

CE standard timings supported
  1920 x 1080i at       50Hz (16:9) - HDTV (Native)
  1280 x  720p at       50Hz (16:9) - HDTV
   720 x  576p at       50Hz (16:9) - EDTV
   720 x  576i at       50Hz (16:9) - Doublescan
   720 x  576p at       50Hz  (4:3) - EDTV
   720 x  576i at       50Hz  (4:3) - Doublescan
  1920 x 1080i at 59.94/60Hz (16:9) - HDTV
  1280 x  720p at 59.94/60Hz (16:9) - HDTV
   720 x  480p at 59.94/60Hz (16:9) - EDTV
   720 x  480i at 59.94/60Hz (16:9) - Doublescan
   720 x  480p at 59.94/60Hz  (4:3) - EDTV
   720 x  480i at 59.94/60Hz  (4:3) - Doublescan
   640 x  480p at 59.94/60Hz  (4:3) - Default

Display adapter
  Adapter description......... Auxiliary port
  Adapter device ID........... 0x31501002
  Display settings............ n/a



The manual also states some HDMI acceptable H/Vfreq along with pixel freq but for reloutions that I don't care about. Is this data usable ?

So far I only got "overscanned" 1280x720 using various settings from this forum. I'd like to get a 1:1 either 1360 or 1368. Can anyone help me ?
Logged
Ben_Ben

Posts: 1


« Reply #72 on: May 09, 2008, 10:01:01 AM »

I managed to improve the display using this timing along with an option on my TV :

PowerStrip timing parameters:
1368x768=1368,67,112,253,768,3,6,18,84333,272
Generic timing details for 1368x768:
HFP=67 HSW=112 HBP=253 kHz=47 VFP=3 VSW=6 VBP=18 Hz=59
VESA detailed timing:
PClk=84,33 H.Active=1368 H.Blank=432 H.Offset=51 HSW=112 V.Active=768 V.Blank=27 V.Offset=3 VSW=6
Linux modeline parameters:
"1368x768" 84,333 1368 1435 1547 1800 768 771 777 795 +hsync +vsync

I also use a 1360x768 timing but both have some blurred vertical stripes along with pixel clear vertical stripes. I tried to fiddle with the back/front porch but I'm missing something there, I can't get rid on the "blurred areas".

Can anyone point me to the right thing to do ?
Logged
N!ck

Posts: 1


« Reply #73 on: January 01, 2009, 09:29:44 AM »

I'm currently trying to get my Panasonic TX-32LXD85 to do 1366x768 properly. The manual states it is compatible with the signal "1,366 x 768 @60 Hz" and says it needs a horizontal frequency of 48.39 and vertical of 60.04. I'm unable to get it at these frequencies as when you try modifying one the other ends up way out. The settings i'm currently using are:

PowerStrip timing parameters:
1366x768=1366,36,56,336,768,4,5,31,87750,512

Generic timing details for 1366x768:
HFP=36 HSW=56 HBP=336 kHz=49 VFP=4 VSW=5 VBP=31 Hz=61

VESA detailed timing:
PClk=87.75 H.Active=1366 H.Blank=428 H.Offset=20 HSW=56 V.Active=768 V.Blank=40 V.Offset=4 VSW=5

Linux modeline parameters:
"1366x768" 87.750 1366 1402 1458 1794 768 772 777 808 +hsync +vsync

This displays the image at the correct aspect ratio and fills all of the pixels on the screen, but it is somehow not mapped 1:1. Text is blurred and stretched across the pixels sort of thing.
« Last Edit: January 01, 2009, 11:48:01 AM by N!ck » Logged
PlaySomeJazz

Posts: 3


« Reply #74 on: May 30, 2010, 02:55:32 PM »

I have a Philips 192E1SB, 18.5'', widescreen monitor of 1366X768 native resolution. I'm using it as external monitor for my laptop, with an VGA connector. My graphics card is ATI RADEON 200M SERIES and my operating system is Windows XP Professional.

For some reason, 1366X768 @60hz is not listed anywhere. I tried to find it in Windows Display Settings, and in the ATI Catalyst Control Center (the driver), but it wasn't there. The current maximum resolution displayed is 1280X768

In Display Settings, I went to "Advanced" and unticked "Show resolutions that this monitor can't display", but my resolution was not displayed there either. From 1280X768 it jumps to 1280X1024, then to 1400X1050. In ATI Catalyst, the maximum resolution is 1280x1024.

What I'm trying to do now is add the resolution (or something similar that can emulate it to the list of resolutions) using Powerstrip, but I don't know which one is the right one for that.

So far I've tried 1360x768 and 1368x768, both found in this thread, but the text and image starts to flicker when using them (plus not much difference is seen, except for the latter, which makes the desktop area stretch out). The Custom Setting presets for "1366X768 @60hz LCD/TV" don't appear in the list of available resolutions in Windows Display Settings after being added with Powerstrip.

Is there any way to determine the *best* settings for my monitor? Some way of determining them based on its information? A way of recreating the intended viewing experience of the native resolution?

Thank you!

Quote
  Model name............... Philips 192E
  Manufacturer............. Philips
  Plug and Play ID......... PHLC032
  Serial number............ AU51011008896
  Manufacture date......... 2010, ISO week 11
  -------------------------
  EDID revision............ 1.3
  Input signal type........ Analog 0.700,0.000 (0.7V p-p)
  Sync input support....... Separate, Composite, Sync-on-green
  Display type............. RGB color
  Screen size.............. 410 x 230 mm (18,5 in)
  Power management......... Active off/sleep
  Extension blocs.......... None
  -------------------------
  DDC/CI................... Supported
  MCCS revison............. 2.1
  Display technology....... TFT
  Controller............... Novatek 0x0
  Firmware revision........ 0.3
  Firmware flags........... 0x0000006F
  Active power on time..... 97 hours
  Power consumption........ Not supported
  Current frequency........ 16735,61kHz, 60,00Hz

Color characteristics
  Default color space...... Non-sRGB
  Display gamma............ 2,20
  Red chromaticity......... Rx 0,647 - Ry 0,334
  Green chromaticity....... Gx 0,284 - Gy 0,607
  Blue chromaticity........ Bx 0,151 - By 0,071
  White point (default).... Wx 0,313 - Wy 0,329
  Additional descriptors... None

Timing characteristics
  Horizontal scan range.... 30-83kHz
  Vertical scan range...... 56-76Hz
  Video bandwidth.......... 170MHz
  CVT standard............. Not supported
  GTF standard............. Not supported
  Additional descriptors... None
  Preferred timing......... Yes
  Native/preferred timing.. 1366x768p at 60Hz
    Modeline............... "1366x768" 85,500 1366 1436 1579 1792 768 771 774 798 +hsync +vsync

Standard timings supported
     720 x  400p at  70Hz - IBM VGA
     640 x  480p at  60Hz - IBM VGA
     640 x  480p at  67Hz - Apple Mac II
     640 x  480p at  72Hz - VESA
     640 x  480p at  75Hz - VESA
     800 x  600p at  56Hz - VESA
     800 x  600p at  60Hz - VESA
     800 x  600p at  72Hz - VESA
     800 x  600p at  75Hz - VESA
     832 x  624p at  75Hz - Apple Mac II
    1024 x  768p at  60Hz - VESA
    1024 x  768p at  70Hz - VESA
    1024 x  768p at  75Hz - VESA
    1280 x 1024p at  75Hz - VESA
    1152 x  870p at  75Hz - Apple Mac II
    1152 x  864p at  75Hz - VESA STD
    1280 x  720p at  75Hz - VESA STD

Report information
  Date generated........... 30.05.2010
  Software revision........ 2.51.0.853
  Operating system......... 5.1.2600.2.Service Pack 2

Raw data
  00,FF,FF,FF,FF,FF,FF,00,41,0C,32,C0,C0,22,00,00,0B,14,01,03,6E,29,17,78,2A,EE,D1,A5,55,48,9B,26,
  12,50,54,BF,EF,80,71,4F,81,CF,01,01,01,01,01,01,01,01,01,01,01,01,66,21,56,AA,51,00,1E,30,46,8F,
  33,00,9D,EA,10,00,00,1E,00,00,00,FF,00,41,55,35,31,30,31,31,30,30,38,38,39,36,00,00,00,FD,00,38,
  4C,1E,53,11,00,0A,20,20,20,20,20,20,00,00,00,FC,00,50,68,69,6C,69,70,73,20,31,39,32,45,0A,00,54


Logged
Pages: 1 ... 3 4 [5] 6
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2006-2008, Simple Machines Valid XHTML 1.0! Valid CSS!