EnTech Taiwan EnTech Taiwan
November 21, 2017, 08:47:18 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Search Login Register  
Pages: [1]
  Print  
Author Topic: Monitor not displaying any image  (Read 6464 times)
roozbeh007

Posts: 6


« on: June 09, 2013, 11:00:56 AM »

Hello everyone.
I have a problem and I'm hoping someone can help me or maybe point me to the right direction. Thank you in advance for your help and effort.
I have an old high resolution grayscale LCD monitor. This monitor came with a PCI graphic card which I have and the driver for the card is only compatible with windows XP. I am trying to move to Windows7 64 and I am looking for a way to get this monitor working on a ATI card.( i can switch to nvidia if needed)
currently I have the original graphic card connected to a windows XP (PCI slot) and I have a ATI FireGL V5600 (PCIe slot) on the same workstation. if I conect the DVI cable to ATI port, I get no picture but the backlight of the LCD remains on. resolution of the monitor is 1536x2048 (monitor will be used in portrait mode)
I tried to look at the timing via Powerstrip but it could not recognize the card. so I ran Monitor Asset manager and this is the registry info for the monitor:

Monitor
  Windows description...... Plug and Play Monitor
  Manufacturer............. DMS
  Plug and Play ID......... DMS01C3
  Serial number............ 82
  Manufacture date......... 2004, ISO week 36
  Filter driver............ None
  -------------------------
  EDID revision............ 1.2
  Input signal type........ Digital
  Color bit depth.......... Undefined
  Display type............. Monochrome/grayscale
  Screen size.............. 310 x 420 mm (20.6 in)
  Power management......... Active off/sleep
  Extension blocs.......... None
  -------------------------
  DDC/CI................... n/a

Color characteristics
  Default color space...... sRGB
  Display gamma............ 2.20
  Red chromaticity......... Rx 0.620 - Ry 0.330
  Green chromaticity....... Gx 0.300 - Gy 0.600
  Blue chromaticity........ Bx 0.140 - By 0.090
  White point (default).... Wx 0.304 - Wy 0.314
  Additional descriptors... None

Timing characteristics
  Range limits............. Not available
  GTF standard............. Not supported
  Additional descriptors... None
  Preferred timing......... No
  Detailed timing #1....... 2048x1536p at 31Hz (4:3)
    Modeline............... "2048x1536" 100.000 2048 2056 2064 2080 1536 1538 1540 1568 +hsync +vsync
  Detailed timing #2....... 1536x2048p at 31Hz
    Modeline............... "1536x2048" 100.000 1536 1544 1552 1568 2048 2050 2052 2080 +hsync +vsync

Standard timings supported
     720 x  400p at  70Hz - IBM VGA
     640 x  480p at  60Hz - IBM VGA

Report information
  Date generated........... 6/9/2013
  Software revision........ 2.60.0.972
  Data source.............. Registry-Active
  Operating system......... 5.1.2600.2.Service Pack 3

Raw data
  00,FF,FF,FF,FF,FF,FF,00,11,B3,C3,01,52,00,00,00,24,0E,01,02,80,1F,2A,78,24,EE,CE,9E,54,4C,99,23,
  17,4D,50,A0,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,10,27,00,20,80,00,20,60,08,08,
  22,00,90,2C,11,00,00,1E,10,27,00,20,60,00,20,80,08,08,22,00,2C,90,11,00,00,1E,00,00,00,00,00,00,
  00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,42,00,5E


I copy and paste following timing on Powerstrip "1536x2048" 100.000 1536 1544 1552 1568 2048 2050 2052 2080 +hsync +vsync by going to Display Profiles>Configure>Advance Timing Option>Paste Timing From Clipboard.

I apply the setting but still no picture on the monitor (monitor backlights are on at all time)
I appreciate any help on solving this...
INF report:

; INF file generated by Monitor Asset Manager (2.60.0.972), 6/9/2013
; Copyright (c) EnTech Taiwan, 1995-2011.
; Internet: http://www.entechtaiwan.com

[Version]
Signature="$WINDOWS NT$"
Class=Monitor
ClassGUID={4d36e96e-e325-11ce-bfc1-08002be10318}
Provider=%MFG%
DriverVer=6/9/2013, 1.0.0.0
;CatalogFile=YourSignedCatalogFile.cat

[DestinationDirs]
DefaultDestDir=23

[SourceDisksNames]
1=%DISC%

[SourceDisksFiles]
;YourColorProfileFile.icm

[Manufacturer]
%VENDOR%=EDID_OVERRIDE,NTx86,NTamd64

[EDID_OVERRIDE.NTx86]
%PRODUCTID%=OVERRIDDEN-EDID.Install, MONITOR\DMS01C3

[EDID_OVERRIDE.NTamd64]
%PRODUCTID%=OVERRIDDEN-EDID.Install.NTamd64, MONITOR\DMS01C3

[OVERRIDDEN-EDID.Install.NTx86]
DelReg=DEL_CURRENT_REG
AddReg=OVERRIDDEN-EDID.AddReg, MODE1, DPMS
CopyFiles=OVERRIDDEN-EDID.CopyFiles

[OVERRIDDEN-EDID.Install.NTamd64]
DelReg=DEL_CURRENT_REG
AddReg=OVERRIDDEN-EDID.AddReg, MODE1, DPMS
CopyFiles=OVERRIDDEN-EDID.CopyFiles

[OVERRIDDEN-EDID.Install.NTx86.HW]
AddReg=OVERRIDDEN-EDID_AddReg

[OVERRIDDEN-EDID.Install.NTamd64.HW]
AddReg=OVERRIDDEN-EDID_AddReg

[OVERRIDDEN-EDID_AddReg]
;Base EDID
HKR,EDID_OVERRIDE,"0",0x01,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x11,0xB3,0xC3,0x01,0x52,0x00,0x00,0x00,0x24,0x0E,0x01,0x02,0x80,0x1F,0x2A,0x78,0x24,0xEE,0xCE,0x9E,0x54,0x4C,0x99,0x23,0x17,0x4D,0x50,0xA0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x27,0x00,0x20,0x80,0x00,0x20,0x60,0x08,0x08,0x22,0x00,0x90,0x2C,0x11,0x00,0x00,0x1E,0x10,0x27,0x00,0x20,0x60,0x00,0x20,0x80,0x08,0x08,0x22,0x00,0x2C,0x90,0x11,0x00,0x00,0x1E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x42,0x00,0x5E

[DEL_CURRENT_REG]
HKR,MODES
HKR,EDID_OVERRIDE
HKR,,MaxResolution
HKR,,PreferredMode
HKR,,DPMS
HKR,,ICMProfile

[DPMS]
HKR,,DPMS,,1

HKR,,PreferredMode,,"2048,1536,31"
[MODE1]
HKR,,MaxResolution,,"2048,1536,31"

[OVERRIDDEN-EDID.AddReg]
HKR,"MODES\2048,1536,31",Mode1,,""

[OVERRIDDEN-EDID.CopyFiles]
;YourColorProfileFile.icm for non-sRGB displays

[Strings]
MFG="EnTech Taiwan"
DISC="Monitor EDID Override Installation Disk"
PRODUCTID="DMS DMS01C3 (DMS01C3 EDID Override)"
VENDOR="DMS"
Logged
Rik Wang
Administrator
*****
Posts: 8833


« Reply #1 on: June 10, 2013, 02:38:59 AM »

Are you able to run the monitor in landscape mode? (Check it even if the LCD is physically in portrait mode.)
Logged

roozbeh007

Posts: 6


« Reply #2 on: June 12, 2013, 11:56:45 AM »

Rik,
Thanks for your reply. I tried "2048x1536" 100.000 2048 2056 2064 2080 1536 1538 1540 1568 +hsync +vsync on powerstrip by having the monitor in landscape mode.
I even restarted the computer to be sure and unfortunately, no image on the monitor. am I doing everything correctly?
Do you have any idea? Thanks a lot. I have the graphic card and can run the monitor with its on card just fine. is there any info that I can take from there which may help troubleshoot this?
Thanks in advance for all your help.
Logged
Rik Wang
Administrator
*****
Posts: 8833


« Reply #3 on: June 19, 2013, 04:52:12 AM »

It seems like eveything you're doing is right.

Try connecting the monitor to the original graphics card and see if PowerStrip supports it - if so, grab the timing via Advanced Timing Options rather than the EDID and post it here.
Logged

Rik Wang
Administrator
*****
Posts: 8833


« Reply #4 on: June 19, 2013, 04:54:39 AM »

And just to be clear: *without* PowerStrip, when you boot up with the FireGL you get no picture at all? At any resolution and orientation?
Logged

Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2006-2008, Simple Machines Valid XHTML 1.0! Valid CSS!