EnTech Taiwan
    Home    About    Utilities    Libraries    Toolkits    Support    Forums    Store   
EnTech Taiwan
June 18, 2013, 06:13:44 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: 15 May 2011 - softMCCS and MonInfo updated
 
   Home   Help Search Login Register  
EnTech Technical Support Forum >  > PowerStrip for Windows > /T:timing command line does not work
Pages: [1] 2 3 4
« previous next »
  Print  
Author Topic: /T:timing command line does not work  (Read 19262 times)
BangoO
Guest
« on: April 10, 2004, 04:06:10 AM »
Hi ;-)

I created 2 PStrip shortcuts to test the command line interface.

1st one is:
"C:\Program Files\PowerStrip\pstrip.exe" /T:1280,118,40,146,720,70,5,41,95250,278

2nd one is:
"C:\Program Files\PowerStrip\pstrip.exe" /T:1600,151,192,89,1200,7,3,76,222113,272

Those 2 are copies of timings that I use in profiles and that work perfectly.

The problem is, the 1st one does not switch resolution at all (it does not do anything even if it seems to be loading something), and the second one switches to the right resolution (1600*1200) but in 60Hz instead of 85Hz.

Any ideas about how to make this work ?

Thx a lot !
BangoO
Logged
Rik Wang
Administrator
*****
Posts: 8826
« Reply #1 on: April 11, 2004, 09:20:19 AM »
What is the *graphics card*?
Logged
Rik Wang
support@entechtaiwan.com
BangoO
Guest
« Reply #2 on: April 11, 2004, 03:14:55 PM »
Sorry, I forgot to mention that, and that's quite important Smiley

It's an ATI Radeon 9700 Pro.
Logged
Rik Wang
Administrator
*****
Posts: 8826
« Reply #3 on: April 13, 2004, 05:07:07 AM »
I tried the 1600x1200 one and it worked fine: 85Hz. I did this by simply using the Run command off the Windows Start menu.

It is likely the 1280x720 one does nothing simply because the resolution hasn't been *created*. You cannot switch to a resolution that doesn't exist.
Logged
Rik Wang
support@entechtaiwan.com
BangoO
Guest
« Reply #4 on: April 13, 2004, 05:39:44 AM »
Both resolutions work using PStrip's Profiles and HotKeys to Profiles, and they are both accessible via the Windows' Display Properties.
Logged
Rik Wang
Administrator
*****
Posts: 8826
« Reply #5 on: April 13, 2004, 06:57:53 AM »
Then it is the shortcut itself.

Try using the Run command-line and I'm sure you will find it works:
C:\Program Files\PowerStrip\pstrip.exe /T:1600,151,192,89,1200,7,3,76,222113,272
Logged
Rik Wang
support@entechtaiwan.com
BangoO
Guest
« Reply #6 on: April 13, 2004, 08:35:13 AM »
I tried that already, I get the same results.
I get 1600*1200@60Hz instead of 85Hz, and the shortcut to 1280*720@72Hz does nothing at all, although it seems to be loading something.
I'm sure that the timing strings are valid as I verified them again, they are exactly the same as the ones I use in the profiles that work perfecly.
Logged
Rik Wang
Administrator
*****
Posts: 8826
« Reply #7 on: April 13, 2004, 09:13:00 AM »
I have no problems whatsoever using the timing strings you defined on a Radeon 9700, so there is something missing from your description.

Close PowerStrip and post the content of your pstrip.ini file.
Logged
Rik Wang
support@entechtaiwan.com
BangoO
Guest
« Reply #8 on: April 13, 2004, 10:38:06 AM »
Thx for you help Wink

Code:
[Global Options]
NoSafetyChecks=1
Windows=5.1.2600.2.Service Pack 1
Build=387
ActiveHWStatus=1
Mechanism32=2
LastShutdown=1
RestoreOnStartup=1
Hotkeys=1
CompactMemory=0
QuickSetup=1
TD=16960,16215,166
NT.User=0
ShowTipOfDay=1
Threshold=20
IconManagement=0
RecallColor=0
HKmodifier=0
IdleProcess=0
NoApplication=1
NoColor=1
NoClkAdjustments=0
DisableFPPrecision=1
NoSwitches=1
HideModes=0
ForceRefresh=0
NoPerformance=1
NoSorting=1
uHloc=1,1199,2,1200
HardwareID=476C6F62616C204F7074696F6E73

[Driver]
Key=SYSTEM\CURRENTCONTROLSET\Services\Pstrip
KeyExists=1
Start=2
File=C:\WINDOWS\System32\drivers\pstrip.sys
FileFound=1
FileSize=21616
DisplayName=
ImagePath=
Type=1
EnumKeyExists=1

[HW.4E441002.00021002.0100]
MonitorNo=0
Driver=ati2dvag 6.14.10.6430
RefClk=27
DefaultClocks=310500,324000,0,781,0,0,0,0
DefaultSettings=1600,1200,32,85,0
EDID=0
MonitorType=Default Monitor (Microsoft)
MonitorCaps1=1600x1200 (75kHz/85Hz)
MMIO284=00001102
MaxDriverHRes=2048
MaxDriverVRes=1536
1440x720=1440,135,152,33,720,17,3,24,96814,272
1440x960=1440,96,160,256,960,1,3,44,167250,272
1440x864=1440,122,160,38,864,20,3,38,122100,272
1920x1080=1920,154,208,54,1080,58,3,19,161745,272
_1600x1200=1600,170,192,70,1200,20,3,105,229500,272
1280x1024=1280,77,144,259,1024,4,3,54,181575,338
EDID.Source=0
1360x1024=1360,104,120,216,1024,1,3,32,137250,340
0x0=1280X720=1280,118,40,146,720,70,5,41,95250,278
1600x1200=1600,151,192,89,1200,7,3,76,222113,272
Performance=310500,324000,0,33709,2,1,2,6
1280x720=1280,118,40,146,720,70,5,41,95250,278
1280x864=1280,115,136,53,864,59,3,39,114642,272
AGPcmd=530

[Rclk]
310500mpll=46,4,2,01302E04
324000spll=48,4,2,01302E04,00DF8002

[Display Profile]
Default=Default
HD 1080p=HD 1080p
HD 720p=HD 720p
DVD 864p=DVD 864p
DVD 720p=DVD 720p
Display defaults=Display defaults

[Color Profile]
Color defaults=Color defaults

[Color defaults]
HW.4E441002.00021002.0100=0,0,0,0,0,0,50,50,50,20,0,0
HW.41641002.7C06174B.0101=0,0,0,0,0,0,50,50,50,20,0,0
HW.41441002.7C07174B.0100=0,0,0,0,0,0,50,50,50,20,0,0
HW.4E641002.00031002.0101=0,0,0,0,0,0,50,50,50,20,0,0

[Performance Profile]
Performance defaults=Performance defaults

[Performance defaults]
HW.4E441002.00021002.0100=310500,324000,0,781,0,0,0,0
HW.41641002.7C06174B.0101=0,0,0,0,0,0,0,0
HW.41441002.7C07174B.0100=0,0,0,0,0,0,0,0
HW.4E641002.00031002.0101=0,0,0,0,0,0,0,0

[Hotkey Definitions]
24=115
59=103
78=105
74=106
31=110
79=Default
80=DVD 720p
81=DVD 864p
75=HD 720p
76=HD 1080p

[ProcessColor]
Default=0,0,0,0,0,0,50,50,50,20,0,0

[Custom Resolutions]
1440x720=1440,135,152,33,720,17,3,24,96814,272
1440x960=1440,96,160,256,960,1,3,44,167250,272
1440x864=1440,122,160,38,864,20,3,38,122100,272
1920x1080=1920,154,208,54,1080,58,3,19,161745,272
1600x1200=1600,149,192,91,1200,7,3,68,222113,272
1280x720=1280,118,40,146,720,70,5,41,95250,278
1280x864=1280,115,136,53,864,59,3,39,114642,272

[Modelines]
1440x720="1440x720" 96.814 1440 1575 1727 1760 720 737 740 764 +hsync +vsync
1440x960="1440x960" 167.250 1440 1536 1696 1952 960 961 964 1008 +hsync +vsync
1440x864="1440x864" 122.100 1440 1562 1722 1760 864 884 887 925 +hsync +vsync
1920x1080="1920x1080" 161.745 1920 2074 2282 2336 1080 1138 1141 1160 +hsync +vsync
1600x1200="1600x1200" 222.113 1600 1749 1941 2032 1200 1207 1210 1278 +hsync +vsync
1280x720="1280x720" 95.250 1280 1398 1438 1584 720 790 795 836 -hsync -vsync
1280x864="1280x864" 114.642 1280 1395 1531 1584 864 923 926 965 +hsync
+vsync

[Default]
HW.4E441002.00021002.0100=1600,1200,32,85,0

[HD 1080p]
HW.4E441002.00021002.0100=1920,1080,32,60,0

[HD 720p]
HW.4E441002.00021002.0100=1280,720,32,60,0

[DVD 864p]
HW.4E441002.00021002.0100=1280,864,32,60,0

[DVD 720p]
HW.4E441002.00021002.0100=1440,720,32,60,0

[HW.41641002.7C06174B.0101]
EDID=0
MonitorType=Default Monitor (Microsoft)
MonitorCaps1=1600x1200 (75kHz/85Hz)
MMIO284=00000000

[Debug_HW.41641002.7C06174B.0101]
DeviceNo=0
AdapterName=VGA
DeviceName=\\.\DISPLAY1
DeviceID=PCI\VEN_0000&DEV_0000
DisplayClassKey=SYSTEM\CURRENTCONTROLSET\CONTROL\VIDEO\{23A77BF7-ED96-40EC-AF06-9B1F4867732A}\0000
ChipID=14
PCIID=41641002
SubID=7C06174B
FuncNo=0101

[HW.41441002.7C07174B.0100]
MonitorNo=0
Driver=ati2dvag 6.14.10.6360
RefClk=27
DefaultClocks=0,0,0,0,0,0,0,0
DefaultSettings=800,600,32,85,0
EDID=1
EDID.Source=0
CIE.Red.X=642
CIE.Red.Y=349
CIE.Green.X=299
CIE.Green.Y=620
CIE.Blue.X=153
CIE.Blue.Y=74
CIE.WhitePoint.X=290
CIE.WhitePoint.Y=304
MonitorID=MEL4480
SerialNo=111915334
MonitorType=MEL4480 (Plug and Play Monitor)
MonitorCaps1=3080x1728 (108kHz/135Hz)
MMIO284=00001202
MaxDriverHRes=2048
MaxDriverVRes=1536
1440x720=1440,64,152,216,720,1,3,22,100551,272

[DDC]
MonitorID=MEL4480
SerialNo=111915334

[Debug_HW.41441002.7C07174B.0100]
DeviceNo=0
AdapterName=RADEON 9500
DeviceName=\\.\DISPLAY1
DeviceID=PCI\VEN_1002&DEV_4144&SUBSYS_7C07174B&REV_00
DisplayClassKey=SYSTEM\CURRENTCONTROLSET\CONTROL\VIDEO\{6D5731C5-0126-4700-8D62-A8FC224BCBA3}\0000
MonitorClassKey=SYSTEM\CURRENTCONTROLSET\CONTROL\CLASS\{4D36E96E-E325-11CE-BFC1-08002BE10318}\0021
MonitorEnumKey=SYSTEM\CURRENTCONTROLSET\ENUM\DISPLAY\MEL4480\5&107989C8&0&10000080&01&00
ChipID=14
PCIID=41441002
SubID=7C07174B
FuncNo=0100

[Display defaults]
HW.4E641002.00031002.0101=1280,1024,32,1,0

[HW.4E641002.00031002.0101]
EDID=0
MonitorType=Default Monitor (Microsoft)
MonitorCaps1=1600x1200 (75kHz/85Hz)
MMIO284=00000000

[Debug_HW.4E641002.00031002.0101]
DeviceNo=0
AdapterName=VGA
DeviceName=\\.\DISPLAY1
DeviceID=PCI\VEN_0000&DEV_0000
DisplayClassKey=SYSTEM\CURRENTCONTROLSET\CONTROL\VIDEO\{23A77BF7-ED96-40EC-AF06-9B1F4867732A}\0000
ChipID=14
PCIID=4E641002
SubID=00031002
FuncNo=0101

[Diagnostics]
00=Diagnostic report - generated on 4/8/2004
02=PowerStrip build - 387
03=Windows build - v.5.1.2600.2.Service Pack 1
04=DirectX build - v.5.3.0000000.900 built by: DIRECTX
05=OpenGL renderer - (n/a)
09=Type - Intel
0A=AGP aperture - 128 MB
0B=AGP transfer mechanism - DMA
0C=AGP non-local memory - 119.9 MB
0D=AGP revision - 3.00
0E=AGP transfer rates supported - 4x, 8x
0F=Current AGP transfer rate - 8x
10=Sideband addressing - Enabled
11=Fast write protocol - hardware support, but currently disabled
12=AGP texturing - Enabled
16=Identity - RADEON 9700 PRO
17=Memory clock - 310.50 MHz
18=Engine clock - 324.00 MHz
19=IRQ - 16, shared
1A=AGP revision - 3.00
1B=AGP transfer rates supported - 4x, 8x
1C=Current AGP transfer rate - 8x
1D=Sideband addressing - Enabled
1E=Display driver - ati2dvag.dll, v.6.14.10.6430
1F=DirectX driver - ati2dvag.dll, v.6.14.10.6430
20=Attached monitor - Default Monitor (Microsoft)
21=Monitor caps (1) - 1600x1200, 75kHz, 85Hz
25=AsusTek RAID controller (3373105Ah) - using IRQ23
26=Techsan Electronics Network controller (210313D0h) - using IRQ21
27=AsusTek Ethernet controller (10198086h) - using IRQ18
28=RADEON 9700 PRO (4E441002h) -
using IRQ16
2D=AsusTek Universal serial bus (USB) (24D28086h) - using IRQ16
2E=AsusTek Universal serial bus (USB) (24D48086h) - using IRQ19
2F=AsusTek Universal serial bus (USB) (24D78086h) - using IRQ18
30=AsusTek Universal serial bus (USB) (24DE8086h) - using IRQ16
31=AsusTek Universal serial bus (USB) (24DD8086h) - using IRQ23
35=AsusTek RAID controller (24DF8086h) - using IRQ18
36=AsusTek SMBus (24D38086h) - using IRQ5
37=AsusTek Audio device (24D58086h) - using
IRQ17

[Devices]
FF=PCI00000,PCI00004,PCI00008,PCI0000C,PCI00010,PCI00014,PCI00018,PCI0001C,PCI00020,PCI00024,PCI0002C,PCI00030,PCI00034,PCI0003C,CAP00010,CAP00011,CAP00012,CAP00020,CAP00021,CAP00022,FUNC
00=3373105A,02300117,01040002,00006091,0000DF01,0000DFA1,0000DC01,FEAFE000,FEAC0000,00000000,80F51043,00000000,00000060,12040117,02220001,00000000,00000000,00000000,00000000,00000000,0320
01=210313D0,04000107,02800001,00004000,FEAE0000,0000DF81,00000000,00000000,00000000,00000000,210313D0,00000000,00000000,00000115,00000000,00000000,00000000,00000000,00000000,00000000,0368
02=10198086,02380007,02000000,00000004,FE9E0000,00000000,0000CCE1,00000000,00000000,00000000,80F71043,00000000,000000DC,00FF0112,C8220001,29002000,00000000,00000000,00000000,00000000,0208
03=4E441002,02B00187,03000000,0080FF04,D0000008,0000B001,FE8F0000,00000000,00000000,00000000,00021002,FE8C0000,00000058,00080110,00305002,FF00021B,1F000312,06020001,00000000,00305002,0100
04=4E641002,02B00087,03800000,00004004,C8000008,FE8E0000,00000000,00000000,00000000,00000000,00031002,00000000,00000050,000800FF,06020001,00000000,00305002,00000000,00000000,00000000,0101
05=25788086,20900106,06000002,00000000,E8000008,00000000,00000000,00000000,00000000,00000000,80F61043,00000000,000000E4,00000000,2106A009,00000001,00000000,00300002,1F004A1B,00000B12,0000
06=25798086,00A00107,06040002,00014000,00000000,00000000,40010100,22A0B0B0,FE80FE80,DFE0BFF0,00000000,00000000,00000000,00080000,00000000,00000000,00000000,00000000,00000000,00000000,0008
07=257B8086,00A00107,06040002,00014000,00000000,00000000,00020200,22A0C0C0,FE90FE90,0000FFF0,00000000,00000000,00000000,00060000,00000000,00000000,00000000,00000000,00000000,00000000,0018
08=24D28086,02800005,0C030002,00800000,00000000,00000000,00000000,00000000,0000EF01,00000000,80A61043,00000000,00000000,00000110,00000000,00000000,00000000,00000000,00000000,00000000,00E8
09=24D48086,02800005,0C030002,00000000,00000000,00000000,00000000,00000000,0000EF21,00000000,80A61043,00000000,00000000,00000213,00000000,00000000,00000000,00000000,00000000,00000000,00E9
0A=24D78086,02800005,0C030002,00000000,00000000,00000000,00000000,00000000,0000EF41,00000000,80A61043,00000000,00000000,00000312,00000000,00000000,00000000,00000000,00000000,00000000,00EA
0B=24DE8086,02800005,0C030002,00000000,00000000,00000000,00000000,00000000,0000EF81,00000000,80A61043,00000000,00000000,00000110,00000000,00000000,00000000,00000000,00000000,00000000,00EB
0C=24DD8086,02900106,0C032002,00000000,FEBFFC00,00000000,00000000,00000000,00000000,00000000,80A61043,00000000,00000050,00000417,C9C25801,00000000,20A0000A,20A0000A,00000000,01FF2020,00EF
0D=244E8086,00800107,060400C2,00010000,00000000,00000000,40030300,2280D0D0,FEA0FEA0,0000FFF0,00000000,00000000,00000000,00020000,00000000,00000000,00000000,00000000,00000000,00000000,00F0
0E=24D08086,0280000F,06010002,00800000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00F8
0F=24DB8086,02800007,01018A02,00000000,00000001,00000001,00000001,00000001,0000FC01,FFEFFC00,80A61043,00000000,00000000,00000100,00000000,00000000,00000000,00000000,00000000,00000000,00F9
10=24DF8086,02A00005,01048F02,00000000,0000EFE1,0000EFAD,0000EFA1,0000EFA9,0000EF61,00000000,80A61043,00000000,00000000,00000112,00000000,00000000,00000000,00000000,00000000,00000000,00FA
11=24D38086,02800001,0C050002,00000000,00000000,00000000,00000000,00000000,00000401,00000000,80A61043,00000000,00000000,00000205,00000000,00000000,00000000,00000000,00000000,00000000,00FB
12=24D58086,02900007,04010002,00000000,0000E801,0000EE81,FEBFF800,FEBFF400,00000000,00000000,80F31043,00000000,00000050,00000211,C9C20001,00000000,00000000,00000000,00000000,00000000,00FD

[Game Log]
ZPLAYER-4/13/2004 12:05:56 PM0004=1600x1200,1600x1200x32,1,
ZPLAYER-4/13/2004 12:06:01 PM0004=1600x1200,1600x1200x32,1,
ZPLAYER-4/13/2004 12:06:04
PM0004=1600x1200,1600x1200x32,1,
LOGON-4/13/2004 12:43:35 PM0004=1600x1200,1600x1200x32,1,
LOGON-4/13/2004 12:49:23 PM0004=1600x1200,1600x1200x32,1,
LOGON-4/13/2004 12:49:34 PM0004=1600x1200,1600x1200x32,1,
IEXPLORE-4/13/2004 4:53:53 PM0101=1600x1200,1600x1200x32,1,
MSIMN-4/13/2004 4:53:57 PM0101=1600x1200,1600x1200x32,1,
CMR4-4/13/2004 4:54:00 PM0100=1600x1200,1600x1200x32,1,
CMR4-4/13/2004 4:54:00 PM0004=1600x1200,1600x1200x32,1,
CMR4-4/13/2004 4:54:01 PM0004=1600x1200,1600x1200x32,1,
ZPLAYER-4/13/2004 5:38:10 PM0004=1600x1200,1600x1200x32,1,
ZPLAYER-4/13/2004 5:38:17 PM0004=1600x1200,1600x1200x32,1,
ZPLAYER-4/13/2004 5:38:22 PM0004=1600x1200,1600x1200x32,1,
ZPLAYER-4/13/2004 5:38:56 PM0004=1600x1200,1600x1200x32,1,
ZPLAYER-4/13/2004 5:38:59 PM0004=1600x1200,1600x1200x32,1,
ZPLAYER-4/13/2004 5:58:58 PM0004=1600x1200,1600x1200x32,1,
ZPLAYER-4/13/2004 5:59:03 PM0004=1600x1200,1600x1200x32,1,
ZPLAYER-4/13/2004 5:59:45 PM0004=1600x1200,1600x1200x32,1,
ZPLAYER-4/13/2004 6:10:24 PM0004=1600x1200,1600x1200x32,1,
ZPLAYER-4/13/2004 6:18:58 PM0004=1600x1200,1600x1200x32,1,
ZPLAYER-4/13/2004 6:19:24 PM0004=1600x1200,1600x1200x32,1,
ZPLAYER-4/13/2004 6:19:29 PM0004=1600x1200,1600x1200x32,1,

[Debug_HW.4E441002.00021002.0100]
DeviceNo=0
AdapterName=RADEON 9700 PRO
DeviceName=\\.\DISPLAY1
DeviceID=PCI\VEN_1002&DEV_4E44&SUBSYS_00021002&REV_00
DisplayClassKey=SYSTEM\CURRENTCONTROLSET\CONTROL\VIDEO\{44D94B7A-8D40-4DDB-93DF-2713088FDF3F}\0000
MonitorClassKey=SYSTEM\CURRENTCONTROLSET\CONTROL\CLASS\{4D36E96E-E325-11CE-BFC1-08002BE10318}\0019
MonitorEnumKey=SYSTEM\CURRENTCONTROLSET\ENUM\DISPLAY\DEFAULT_MONITOR\5&1BDC3663&4&10000000&01&00
ChipID=14
PCIID=4E441002
SubID=00021002
FuncNo=0100
Logged
Rik Wang
Administrator
*****
Posts: 8826
« Reply #9 on: April 13, 2004, 03:32:02 PM »
I dont see anything wrong there, except for the fact that you are 50 builds old. Try upgrading to the latest 3.50 build and see if you still have this problem.
Logged
Rik Wang
support@entechtaiwan.com
BangoO
Guest
« Reply #10 on: April 13, 2004, 03:49:24 PM »
I tried 3.49 I think and had the same problems...
Moreover, the Advanced Settings were greyed out.
I'll try the latest 3.50 then.
Logged
BangoO
Guest
« Reply #11 on: April 13, 2004, 03:50:58 PM »
Hmmm your link does not work, I get redirected to http://www.entechtaiwan.com/index.shtm
Logged
Rik Wang
Administrator
*****
Posts: 8826
« Reply #12 on: April 13, 2004, 04:55:14 PM »
If Advanced timing options were greyed out, then I cannot help you. Check the software you are running.
Logged
Rik Wang
support@entechtaiwan.com
BangoO
Guest
« Reply #13 on: April 14, 2004, 02:38:04 AM »
What about the link you gave me that does not work (for the 3.50 beta) ? Smiley
Logged
Rik Wang
Administrator
*****
Posts: 8826
« Reply #14 on: April 14, 2004, 03:24:30 AM »
I tried it, and it seems to be ok?
Logged
Rik Wang
support@entechtaiwan.com
Pages: [1] 2 3 4
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2006-2008, Simple Machines Valid XHTML 1.0! Valid CSS!